Cisco(VoIP)Unified Communications
Cisco Phone system Hardware Specifications
Cisco Unified Communications 500 Series chassis specifications
Cisco Phone System UC and IP Phones
Specifications of Cisco Unified Communications 500 Series
Cisco Unified Communications 500 Series |
Cisco Unified Communications 520 System (8- and 16-user configuration) |
Cisco Unified Communications 520 System (24-, 32- and 48-user configuration) |
Packaging Type |
Desktop or wall-mount |
Rack-mount |
Product Architecture |
DRAM |
• Cisco IOS Software: 256 MB
• Voice messaging: 512 MB |
Compact Flash memory |
• Cisco IOS Software: 128 MB
• Voice messaging: 1 GB Compact Flash |
Onboard Ethernet ports |
• Eight 10-/100-Mbps LAN
• One 10/100 WAN uplink
• One 10/100 Ethernet expansion port |
Voice expansion slots |
1 voice interface card (VIC) slot to support Cisco VIC modules listed in Table 6 for voice and fax |
MOH |
Single 3.5-mm audio port |
Integrated hardware-based encryption |
Yes |
Integrated inline PoE ports |
8 built-in PoE ports |
FXS and DID ports |
4 built-in FXS ports (DID is available via additional module listed in table 6 below) |
PSTN interfaces
(FXO, BRI or T1/E1) |
4 to 12 FXO ports or 2 to 6 BRI ports (VIC slot can be used to add interfaces in some configurations)
Fixed 48-user configuration is also available with integrated T1/E1 interface
Accessory T1/E1 VWIC interface card: Available for use in the 8-, 16-, 24- and 32-user UC500 models (VIC slot can be used to add this T1/E1 interface card) |
Console port (up to 115.2 kbps) |
1 |
Voicemail ports |
6 ports for voicemail and Automated Attendant |
Deployment Options |
Desktop, wall-mount, and rack-mount (rack-mount requires an optional rack-mount bracket) |
19-in. (48.26-cm) rack-mount |
Power Requirements |
Power supply |
External |
Internal |
AC input voltage |
100 to 240 VAC |
100 to 240 VAC |
AC input frequency |
50 to 60 Hz |
50 to 60 Hz |
AC input current |
4 to 2A (100 to 240V) |
3 to 1.5A (100 to 240V) |
AC input surge current |
50 to 100A (100 to 240V) |
30 to 60A (100 to 240V) |
Maximum inline power distribution |
82W |
82W |
Power dissipation: AC without IP phone support |
80W
90W (including external adapter) |
95W |
Power dissipation: AC with IP phone support for IP phones |
175W
180W (including external adapter) |
200W |
Environmental Specifications |
Operating temperature |
32 to 104°F (0 to 40°C) |
32 to 104°F (0 to 40°C) |
Operating humidity |
10 to 85% noncondensing operating; 5 to 95 noncondensing, nonoperating |
|
Nonoperating temperature |
4 to 149°F (-20 to 65°C) |
4 to 149°F (-20 to 65°C) |
Operation altitude |
• 104°F (40°C) at sea level
• 87.8°F (31°C) at 6,000 ft (1800m)
• 77°F (25°C) at 10,000 ft (3000m)
• 34.7°F (1.5°C) per 1,000 ft |
• 104°F (40°C) at sea level
• 87.8°F (31°C) at 6,000 ft (1800m)
• 77 °F (25°C) at 10,000 ft (3000m)
• 34.7°F (1.5°C) per 1,000 ft |
Dimensions (H x W x D) |
2.625 x 10.5 x 11.05 in.
(6.67 x 26.67 x 28.07 cm) |
3.5 x 17.5 x 14 in.
(8.89 x 44.45 x 35.56 cm) |
Power supply dimensions
(H x W x D) |
1.7 x 4 x 7.5 in.
(4.3 x 10.16 x 19.05 cm) |
Internal power supply |
Rack height |
1.5 rack unit (RU) |
2Rus |
Weight (fully configured) |
8 lb (3.63 kg) |
14.5 lb (6.58 kg) |
Power supply weight |
3 lb (1.36 kg) |
Internal |
Noise level (minimum and maximum) |
Normal operating temperature:
<78°F (25.6°C): 34 dBA
->78°F (25.6°C) through <104°F (40°C): 37 dBA
->104°F (40°C): 42 dBA |
Normal operating temperature:
90°F (32.2°C): 44 dBA
53 dBA (at maximum fan speed) |
Regulatory Compliance |
Safety |
• IEC 60950-1
• AS/NZS 60950.1
• CAN/CSA-C22.2 No. 60950-1
• EN 60950-1
• UL 60950-1 |
Immunity |
• EN 55024
• EN 300-386
• EN 61000-6-2
• EN 50082-1
• EN 55024 (CISPR 24) |
EMC |
• FCC Part 15, ICES-003
• EN55022, CISPR 22
• AS/NZS
• CNS13438
• VCCI V-3
• EN 55024
• EN 300-386
• EN 61000-3-2
• EN 61000-3-3
• EN 50082-1
• EN 55024 (CISPR 24)
• EN 61000-4-2
• EN 61000-4-3
• EN 61000-4-4
• EN 61000-4-5
• EN 61000-4-6
• EN 61000-4-8
• EN 61000-4-11
• EN 61000-6-2 |
TELCOM* |
• FXS/DID
• TIA-968-A3
• CS-03 Part I
• ACIF S002
• ACIF S003
• ANZ PTC200
• ISDN BRI S/T (voice and data BC)
• TIA-968-A3
• CS-03 Part VI
• TBR3
• ACIF S031
• ANZ PTC200
• MPMHAPT Japan Digital
• FXO
• TIA-968-A3
• CS-03 Part I
• TBR21
• MPMHAPT Japan Analog
• ACIF S002
• ACIF S003
• ACIF S004
• ANZ PTC200
• MOH interface
• ACIF S038
• ACIF S004
• TIA-464C |
Modular Support
lists available modules and interface cards supported in the open slot.
Modules and Interface Cards Supported in the Open Slot
Feature |
Benefit |
VIC-4FXS/DID, VIC3-4FXS/DID |
4-port VIC-FXS/DID |
VIC2-FXS |
2-port VIC-FXS |
VIC2-2FXO |
2-port VIC-FXO (universal) |
VIC3-2FXS/DID |
2-port VIC-FXS/DID |
VIC2-4FXO |
4-port VIC-FXO (universal) |
VIC2-2BRI-NT/TE |
2-port VIC card-BRI (NT and TE) |
VWIC2-1MFT-T1/E1 |
1-port VWIC-T1/E1 for voice (ISDN PRI and CAS) - data is not supported |
UC520-8U-4FXO-K9
• 8 User configuration with 4 PSTN trunks (FXO), 4 Analog ports (FXS), 8 PoE ports, 1 VIC slot for expansion
• Feature licenses for call control, voicemail and Cisco Unified IP Phones
UC520W-8U-4FXO-K9
• 8 User configuration with 4 PSTN trunks (FXO), 4 Analog ports (FXS), 8 PoE ports, 1 VIC slot for expansion, Integrated Wireless
• Feature licenses for call control, voicemail and Cisco Unified IP Phones
UC520-8U-2BRI-K9
• 8 User configuration with 2 BRI trunks (BRI), 4 Analog ports (FXS), 8 PoE ports, 1 VIC slot for expansion
• Feature licenses for call control, voicemail and Cisco Unified IP Phones
UC520W-8U-2BRI-K9
• 8 User configuration with 2 BRI trunks (BRI), 4 Analog ports (FXS), 8 PoE ports, 1 VIC slot for expansion, Integrated Wireless
• Feature licenses for call control, voicemail and Cisco Unified IP Phones
UC520-16U-4FXO-K9
• 16 User configuration with 4 PSTN trunks (FXO), 4 Analog ports (FXS), 8 PoE ports, 1 VIC slot for expansion
• Feature licenses for call control, voicemail and Cisco Unified IP Phones
Note: requires an eight (8) port Cisco Catalyst Express 520 switch
UC520W-16U-4FXO-K9
• 16 User configuration with 4 PSTN trunks (FXO), 4 Analog ports (FXS), 8 PoE ports, 1 VIC slot for expansion, Integrated Wireless
• Feature licenses for call control, voicemail and Cisco Unified IP Phones
Note: requires an eight (8) port Cisco Catalyst Express 520 switch
UC520-16U-2BRI-K9
• 16 User configuration with 2 BRI trunks (BRI), 4 Analog ports (FXS), 8 PoE ports, 1 VIC slot for expansion
• Feature licenses for call control, voicemail and Cisco Unified IP Phones
Note: requires an eight (8) port Cisco Catalyst Express 520 switch
UC520W-16U-2BRI-K9
• 16 User configuration with 2 BRI trunks (BRI), 4 Analog ports (FXS), 8 PoE ports, 1 VIC slot for expansion, Integrated Wireless
• Feature licenses for call control, voicemail and Cisco Unified IP Phones
Note: requires an eight (8) port Cisco Catalyst Express 520 switch
UC520-24U-8FXO-K9
• 24 User configuration with 8 PSTN (FXO), 4 Analog ports (FXS), 8 PoE ports, 1 VIC slot for expansion
• Feature licenses for user configurations of call control, voicemail and Cisco Unified IP Phones
Note: requires a twenty-four (24) port Cisco Catalyst Express 520 switch
UC520-24U-4BRI-K9
• 24 User configuration with 4 BRI trunks (BRI), 4 Analog ports (FXS), 8 PoE ports, 1 VIC slot for expansion
• Feature licenses for call control, voicemail and Cisco Unified IP Phones
Note: requires a twenty-four (24) port Cisco Catalyst Express 520 switch
UC520-32U-8FXO-K9
• 32 User configuration with 8 PSTN trunks (FXO), 4 Analog ports (FXS), 8 PoE ports, 1 VIC slot for expansion
• Feature licenses for user configurations of call control, voicemail and Cisco Unified IP Phones
Note: requires a twenty-four (24) port Cisco Catalyst Express 520 switch
UC520-32U-4BRI-K9
• 32 User configuration with 4 BRI trunks (BRI), 4 Analog ports (FXS), 8 PoE ports, 1 VIC slot for expansion
• Feature licenses for call control, voicemail and Cisco Unified IP Phones
Note: requires a twenty-four (24) port Cisco Catalyst Express 520 switch
UC520-48U-12FXO-K9
• 48 User configuration with 12 PSTN trunks (FXO), 4 Analog ports (FXS), 8 PoE ports
• Feature licenses for user configurations of call control, voicemail and Cisco Unified IP Phones
Note: requires two twenty-four (24) port Cisco Catalyst Express 520 switch
UC520-48U-6BRI-K9
• 48 User configuration with 6 BRI trunks (BRI), 4 Analog ports (FXS), 8 PoE ports
• Feature licenses for call control, voicemail and Cisco Unified IP Phones
Note: requires two twenty-four (24) port Cisco Catalyst Express 520 switch
UC520-48U-T/E/F-K9
• 48 User configuration with a T1/E1 interface, 4 additional PSTN trunk ports (FXO), 4 Analog ports (FXS), 8 PoE ports, 1 VIC slot for expansion
• Feature licenses for user configurations of call control, voicemail and Cisco Unified IP Phones
Note: requires two twenty-four (24) port Cisco Catalyst Express 520 switch
UC520-48U-T/E/B-K9
• 48 User configuration with a T1/E1 interface, 2 additional BRI trunk ports, 4 Analog ports (FXS), 8 PoE ports, 1 VIC slot for expansion
• Feature licenses for user configurations of call control, voicemail and Cisco Unified IP Phones
Note: requires two twenty-four (24) port Cisco Catalyst Express 520 switch
License-based upgrades are now orderable for the Unified Communications 500 Series models. This allows upgrades from the 8-user, desktop form factor version to the 16-user version. In addition, the 24-user system, available in the 19-inch rack mount form factor, can be upgraded to either a 32- or 48-user system. An upgrade from 48-users to 64-users
|
|
|
